BULBS & LUMPS

CBR20 lamps are for use in recess down lights, track and outdoor security lights. These are long life maintenance free LED replacement lamps.

 FEATURES 
• Direct incandescent replacement
• 110° Beam angle
• E26 medium Edison Screw-in base
• Built-in high efficiency LED driver
• 25,000 hour life span
• ENERGY STAR qualified
• ETL listed for damp locations (-20°C - 40°C)
• 5 year warranty on all electronics and housing

Specification Sheet

CBPAR20 bulbs are for use in recess down lights, track and outdoor security lights. These are long life maintenance free LED replacement lamps.

 FEATURES 
• Direct incandescent replacement
• 25° Beam angle
• E26 medium Edison Screw-in base
• Built-in high efficiency LED driver
• 25,000 hour life span
• ENERGY STAR certified
• ETL listed for damp locations (-20°C - 40°C)
• 5 year warranty on all electronics and housing

Specification Sheet

CBBR40 lamps are for use in recess down lights, track and outdoor security lights. These are long life maintenance free LED replacement lamps.

 FEATURES 
• Direct incandescent replacement
• 110° Beam angle
• E26 medium Edison Screw-in base
• Built-in high efficiency LED driver
• 25,000 hour life span
• ENERGY STAR qualified
• ETL listed for damp locations (-20°C - 40°C)
• 5 year warranty on all electronics and housing

Specification Sheet

CBPAR38 bulbs are for use in recess down lights, track and outdoor security lights. These are long life maintenance free LED replacement lamps.

 FEATURES 
• Direct incandescent replacement
• 25° Beam angle
• E26 medium Edison Screw-in base
• Built-in high efficiency LED driver
• 25,000 hour life span
• ENERGY STAR certified
• ETL listed for damp locations (-20°C - 40°C)
• 5 year warranty on all electronics and housing

Specification Sheet

The CBDEB (dual-ended bypass, which is hot on both ends) series of LED T8 lamps replace conventional fluorescent lamps in existing luminaires. Offering significant energy-efficiency and lifetime improvements over fluorescent lamps, CBDEB lamps are installed by bypassing existing fluorescent ballasts, and hard-wiring tombstone lamp-holders directly to incoming AC power leads. Dual-ended bypass lamps eliminate the need to replace shunted tombstone lamp-holders in existing fluorescent luminaires with instant-start ballasts.

  FEATURES 

• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures (except CBDEB8-43, which is available in 5000k only).*
• Long-life LEDs provide up to 90,000 hours of operation with at least 70% of initial lumens output (L70).**
• Models provide 1,100 to 5,500 lumens per lamp, and 121 to 129 lumens per watt (LPW).*
• Uniform illumination with no visible LED pixilation
• Universal 120-277 AC voltage (50-60Hz) is standard
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index ≥ 80.
• Full glass housing inhibits yellowing and distortion
• Easy installation in existing fluorescent luminaires. Bypass models connect directly to incoming AC power leads.

 * contact factory for other color temperatures and lumen packages.

**L70 hours are IES TM-21-11 calculated hours.

  WARRANTY/LISTING 

• cULus listed for dry and damp locations in ambient temperatures from -20°C to 45°C (-4°F to 113°F).
• DLC standard approved (except 3- & 8-foot models, which are not eligible under the DLC linear replacement lamps category).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15 class B.
• CBDEB8-43 has standard PET (polyethylene terephthalate) polyester coating for shatter-proof performance.
• 5-year warranty of all electronics and housing.
• Other models are available as shatter-proof by special order.

Specification Sheet

The CBDEB (dual-ended bypass, which is hot on both ends) series of LED T8 lamps replace conventional fluorescent lamps in existing luminaires. Offering significant energy-efficiency and lifetime improvements over fluorescent lamps, CBDEB lamps are installed by bypassing existing fluorescent ballasts, and hard-wiring tombstone lamp-holders directly to incoming AC power leads. Dual-ended bypass lamps eliminate the need to replace shunted tombstone lamp-holders in existing fluorescent luminaires with instant-start ballasts.

  FEATURES 

• Available in 3500k (warm/neutral white), 4000k (neutral white) and 5000k (cool white) color temperatures (except CBDEB8-43, which is available in 5000k only).*
• Long-life LEDs provide up to 90,000 hours of operation with at least 70% of initial lumens output (L70).**
• Models provide 1,100 to 5,500 lumens per lamp, and 121 to 129 lumens per watt (LPW).*
• Uniform illumination with no visible LED pixilation
• Universal 120-277 AC voltage (50-60Hz) is standard
• Power factor > 0.90.
• Total harmonic distortion < 20%
• Color rendering index ≥ 80.
• Full glass housing inhibits yellowing and distortion
• Easy installation in existing fluorescent luminaires. Bypass models connect directly to incoming AC power leads.

 * contact factory for other color temperatures and lumen packages.

**L70 hours are IES TM-21-11 calculated hours.

  WARRANTY/LISTING 

• cULus listed for dry and damp locations in ambient temperatures from -20°C to 45°C (-4°F to 113°F).
• DLC standard approved (except 3- & 8-foot models, which are not eligible under the DLC linear replacement lamps category).
• Complies with RoHS (Restriction on Hazardous Substances) requirements.
• Complies with FCC Part 15 class B.
• CBDEB8-43 has standard PET (polyethylene terephthalate) polyester coating for shatter-proof performance.
• 5-year warranty of all electronics and housing.
• Other models are available as shatter-proof by special order.

Specification Sheet