Dimmable 7 Watt LED Recessed Lighting Fixture, Warm White, Energy Efficient. Reduced energy consumption by up to 80%. Can replace 70W halogen bulbs. Flush mounts in 3.54 inch with spring retaining clips. Pivots +/-15 degrees on one axis. Easily removed from flush mount bracket. Power adapter included. 2 year guarantee. UL Certified

7W LED Recessed Light w/Cable & Plug, Cool White 6000K

ETL-listed, ROHS - Easy installation: comes with E26 base adapter, fits most 3" metal cans for retro-fit installation 50 Watt Halogen Equivalency. - Damp Locations (Could be used outdoor and indoors) - Dimmable: compatible with most LED dimmers, using an internal driver, no external ballast or starter needed

4" Gimbal solution with integrated LED power supply and thermal management system combined in a single compact unit designed to fit most standard 4" recessed cans.

ILLUMINATION Long life LEDs with up to 50,000 hours at 70% lumen maintenance. Choice of 2700K, 3000K, 4000K and 5000K color temperature with 80 CRI. Produces 675-750 lumens output from luminaire. Uses 1.18W high power, high quality LEDs.

ELECTRICAL Dimmable to 10% with most dimmers. Save 75% compared to incandescent sources. High efficiency driver with a power factor ≥.90 with input power of 120V, 50-60Hz. Built-in LED Driver. Power consumption of 10 watts. Operation temperature of -20°C - 40°C (-4°F - 104°F).

MOUNTING Easy installation with integral clips. No tools required for installation.

HOUSING Compatible with most 4“ housings. Compatible with insulated, non-insulated, and air-tight ceilings. Durable thermoplastic construction. E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.

WARRANTY/LISTING Tested in accordance with IESNA LM79 & LM80. ETL Listed for wet location. Energy Star qualified. Passes FCC Class B. Meets State of California Title 24 requirements. Five year warranty on all electronics and housing.

Specification Sheet 

Economy 5” & 6” Recessed downlight retrofit solution with integrated LED power supply and thermal management system combined in a single compact unit designed to fit most standard 5” & 6” recessed cans.

FEATURES Long life LEDs with up to 50,000 hours at 70% lumen maintenance. Choice of 2700K, 3000K, 4000K or 5000K color temperatures with 80 CRI Produces 800-860 lumens output from luminaire Uses 1.18W high power, high quality LEDs Dimmable to 10% with most dimmers Save 75% compared to incandescent sources High efficiency driver with a power factor ≥.90 with input power of 120V, 50-60Hz

ELECTRICAL Built-in LED Driver Power consumption of 12 watts Operation temperature of -20°C -40°C (-4°F- 104°F)

MOUNTING Easy installation with adjustable torsion spring Torsion spring is designed to fit into 5” or 6” housing automatically without changing mounting tab No tools required for installation * Contact factory for other color temperatures and lumen packages. ** L70 hours are IES TM-21-11 calculated hours.

WARRANTY & LISTINGS Tested in accordance with IESNA LM79 & LMB0 ETL Listed for wet location ENERGY STAR qualified Passes FCC Class B 5-year warranty on all electronics and housing

HOUSING Compatible with most 5” and 6” housings Compatible with insulated, non-insulated, and air-tight ceilings Durable thermoplastic construction E26 medium screw-base Edison connector provides easy retrofit of incandescent housings 6" square baffle snap-in (optional)

Specification Sheet

UL-listed, ROHS - Easy installation: comes with E26 base adapter, fits most 3" metal cans for retro-fit installation 50 Watt Halogen Equivalency. - Wet Locations (Could be used outdoor and indoors) - Dimmable: compatible with most LED dimmers, using an internal driver, no external ballast or starter needed

Specification Sheet

• Galvanized steel construction
• Dimensions - 3 1/2" x 2 7/8" x 9 3/4"
• 5 year warranty

Specification Sheet

4" LED dedicated IC housing, CARDL4-HSNG-REM is designed for remodel installations and are suitable for use in ceilings where the housing can be in direct contact with insulation.  Remodel housing installs into existing drywall or wood ceiling with no above access.  Air tight construction reduces energy costs by reducing the amount of air leakages through the ceiling.

• cULus Listed for Damp Location 
• cULus Listed for Feed Through
• Certified under ASTM-E283 for Air Tight construction
• Meets state of California title 24 requirements
• Listed for through branch circuit wiring
• Contains one 1-1/8", six 7/8" knockouts and four romes pryouts with strain relief.
• Four remodel clips secure housing and accommodates 1/2" abd 5/8" ceiling materials. 

Specification Sheet

LED-GIMBAL-PRO Series lights are bright, energy efficient and elegantly designed. They are an ideal solution for commercial and residential applications requiring compact shape, superior quality and visual aesthetics. This 8W light produces 696-784Lm (depending on the CCT). At 1.77" tall and 2.48" round they can fit into tight spaces that a traditional recessed can light can't, such as ceilings with ductwork/piping/obstructions, hot-roof ceilings with limited vertical clearance, and tight soffits.  It comes in Black, White and Brushed Nickel Finishes. Each light can be set at 3000K, 4000K or 5000K CCT (Adjustable). These lights feature an easily adjustable LED face (Gimbal) that can be pointed straight downward, making them compatible with sloped ceilings. This product is ETL certified.

• Energy Consumption: 8W
• Input Voltage: 110-130 VAC
• Beam Angle: 40 Degrees
• Color Temperature: 3000K, 4000K or 5000K (Adjustable)
  
• Finish: Black, White or Brushed Nickel
• Dimmable: Yes
  
• Installation: Recessed mount
• Certifications: ETL, CE, RoHS
• Trim Diameter: 4.72in (120mm)
• Module/Body Diameter: 2.48" (63mm)
• Height: 1.77in (45mm)
• Junction Box Length: 4.25" (108mm) 
• Junction Box Width: 2.4" (60mm)
• Junction Box Height: 1.33" (34mm)
• Cutout hole: 2 3/4" (70mm) to 2 7/8" (73mm)
• Lifespan: 39,000 hours
• Warranty: 5 years

Specification Sheet

2" LED Baffle Retrofit kit. It is compatible with most 2” recessed standard housings. Ideal for both remodel or new construction applications. The retrofit kit comes with a disconnect screw-in base lead for easy installation into standard incandescent sockets. 

• White painted Diecast body is appropriate for heat dissipation.
• Oversized trim ring constructed from one-piece diecast 
• 3 Tension clips pre-installed on unit for easy installation
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.
• 9W - 470 Lumens
• Protected LED driver performs at 120V
• Dimming down to 5% with most dimmers.
• CRI >80 or >90
• cULus classified
• Energy star qualified
• Title 24 compliant
• We locations (Not suitable for coastal/salt water area)
• Damp Locations
• RoHS compliances 
• Tested in accordance with IESNA LM79 & LM80
• Dimensions - 4 3/8" x 2 3/4"

Specification Sheet

3" IC housing, is designed for new construction installations and suitable for use in ceiling where the housing can be direct contact with insulation. Air tight construction reduces energy costs by reducing the amount of air leakages through the ceiling.

PLASTER FRAME

• Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box.

JUNCTION BOX

• Listed for through branch circuit wiring.
• Contains one 1-1/8”, six 7/8” knockouts and four Romex pryouts with strainrelief.

BAR HANGER

• Pre-installed Real nail easily installs in regular lumber, engineered lumber.
• Bar Hangers are adjustable from 13-5/8” to 25” and can be repositioned 90 degree on plaster frame.

LISTINGS

• cUL Listed for Damp Location
• cUL Listed for Feed Through
• Certified under ASTM-E283 for Air Tight construction
• Meet California title 24 requirement

SPECIFICATIONS:

• Plaster Frame

> Galvanized Steel Construction

> Housing with J-Box can be separated from the frame, easily to connect wires

• Junction Box

> Listed for through branch circuit wiring

> Contains two 3/8 knockouts

• Bar Hanger

> Pre-installed real nail easily installs in regular lumber, engineered lumber

> Bar Hangers are adjustable from 13-5/8" to 25" and can be repositioned 90 degree on plaster frame

Specification Sheet

7W Dimmable LED Recessed Light w/Cable & Plug, 3500K CCT

3" LED dedicated Remodel housing, is designed for remodel applications and suitable for use in ceiling where the housing can be direct contact with insulation. Remodel housing install into existing drywall or wood ceiling with no above access. Air tight construction reduces energy costs by reducing the amount of air leakages through the ceiling. 

• Contains one 1-11/8", six 7/8" knockouts and four Romex pryouts with strain relief.
• Four remodel clips secure housing and accomadates 1/2" and 5/8" celing materials
• cULus Listed for Damp Location 
• cULus Listed for Feed Through
• Certified under ASTM-E283 for Air Tight construction
• Meets state of California title 24 requirements
• Listed for through branch circuit wiring.

Specification Sheet

Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.

 FEATURES 
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature.

Specification Sheet

Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.

 FEATURES 
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature.

Specification Sheet

Energy efficient LED Flat Square Retrofit kit provides quick and easy installation with no can required. Durable powder-coated diecast trim with enclosed J-box is attached with a water-tight connection. Pre-installed plastic clips included.

 FEATURES 
▪ 120V Dimmer standard, 50/60Hz.
▪ Dimmable down to 5% with most market dimmers.
▪ Use for recessed applications with drywall or drop tile ceilings (no recessed can needed).
▪ Small, lightweight J-box standard.
▪ Long life, 50,000 hour LEDs.
▪ -30°C ~ 40°C (-22°F ~ 104°F) operating temperature.

Specification Sheet

3" LED Square Baffle Retrofit kit. It is compatible with most 3” recessed standard housings. Ideal for both remodel or new construction applications. The retrofit kit comes with a disconnect screw-in base lead for easy installation into standard incandescent sockets. 

• White painted Diecast body is appropriate for heat dissipation.
• Oversized trim ring constructed from one-piece diecast 
• 3 Tension clips pre-installed on unit for easy installation
• E26 medium screw-base Edison connector provides easy retrofit of incandescent housings.
• 9W - 470 Lumens
• Protected LED driver performs at 120V
• Dimming down to 5% with most dimmers.
• CRI >80 or >90
• cULus classified
• Energy star qualified
• Title 24 compliant
• Wet locations (Not suitable for coastal/salt water area)
• Damp Locations
• RoHS compliances 
• Tested in accordance with IESNA LM79 & LM80
• Dimensions - 4 3/8" x 2 3/4" 

Specification Sheet