Products
-
LEDQuant
Compact LED Exit Sign, Emergency Light, Double Face, Green Letter, Battery Backup, UL
$18.99
vLEDQuant
Compact LED Exit Sign, Emergency Light, Double Face, Green Letter, Battery Backup, UL
$18.99
Visit product page →• Ultra-compact, low-profile design
• Easy to install, snap together design
• Rugged, injection-molded UL94 V-0 flame retardant, high-
temperature thermoplastic housing
• Universal style - includes 2 face plates, a back plate and mounting
canopy
• Brown-out, short circuit and voltage surge protection
• Overcharge protection
• Maintenance-free NiCad battery
• Universal J-Box mounting system - Ceiling, wall or end mount
• ETL listed 90 minute emergency run time, 24 hour recharge time
• Constant, uniform illumination by long-life, high intensity, red or
green LEDs
• Fully-illuminated 6” characters with 3/4” stroke
• Chevron-style, universal arrow knockouts
• 120/277V dual primary, 60Hz input
• Standard finishes: Black or white
• Suitable for damp location -
vLEDQuant
Compact LED Exit Sign, Emergency Light, Double Face, Red Letter, Battery Backup, UL
$32.49
Visit product page →ILLUMINATION• Ultra bright, energy efficient, long life Red or Green LED.MOUNTING• EZ-snap mounting canopy included for top or end mount.• Universal K/O pattern on back plate for wall mount.ELECTRICAL• Dual 120/277 voltage.• Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.• 1.2V long life, maintenance-free, rechargeable NiCd battery.• Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.• Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.HOUSING• Injection-molded, engineering grade, 5VA flame retardant, high-impact resistant, thermoplastic in white or black finish.• Aesthetically pleasing, curved face, rounded corner design.• EZ snap-out chevron directional indicators.WARRANTY/LISTING• Five year warranty on all electronics and housing. Battery pro rated for five years.• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.• UL Listed for damp locations (0°C - 50°C). -
Visit product page →- Diameter of connector: Inner 2.1mm Nut; Outside: 5,5mm Mom. Material: plastic, copper. Voltage: 0-24V. Current: 2A.
- Color: Black. For 5V-24V power adapter extension cable. It can be used plug DC adapter for CCTV surveillance camera and LED strip etc.
- For DC power - Recommended up to 24 volt, max load 2amp or less. For any applications that requires DC input and accept 2.1mm x 5.5mm plug (Does not work with other size)
SKU Number DC_1F1M-16.4 DC Jack inside diameter 2.1mm DC Jack outside diameter 5.5mm Cable length 16.4 Ft (5M ) -
Visit product page →Dimmable 7 Watt LED Recessed Lighting Fixture, Cool White, Energy Efficient. Reduced energy consumption by up to 80%. Can replace 70W halogen bulbs. Flush mounts in 3.54 inch with spring retaining clips. Pivots +/-15 degrees on one axis. Easily removed from flush mount bracket. Power adapter included. 2 year guarantee. UL Certified
SKU Number REC-7W-CWD Power Consumption 7W Halogen Equivalent 70W Luminous Flux (lm) 700 Lm LED Brand Epistar Dimmable Yes CRI Over 75 Beam Angle 45 Degree Color Cool White (6000K) Input Voltage 110V Cutout diameter 3.54in (90 mm) Certifications CE, RoHS Outside Diameter 4.13in (105mm) Heigth 2.76in (70mm)
Lifespan Over 50,000 hours
-
Visit product page →
Dimmable 7 Watt LED Recessed Lighting Fixture, Warm White, Energy Efficient. Reduced energy consumption by up to 80%. Can replace 70W halogen bulbs. Flush mounts in 3.54 inch with spring retaining clips. Pivots +/-15 degrees on one axis. Easily removed from flush mount bracket. Power adapter included. 2 year guarantee. UL Certified
SKU Number REC-7W-WWD Power Consumption 7W Halogen Equivalent 70W Luminous Flux (lm) 700 Lm LED Brand Epistar Dimmable Yes CRI Over 75 Beam Angle 45 Degree Color Warm White (3000K) Input Voltage 110V Cutout diameter 3.54in (90 mm) Certifications CE, RoHS Outside Diameter 4.13in (105mm) Heigth 2.76in (70mm)
Lifespan Over 50,000 hours
-
LEDQuant
Dimmable Hardwired Under Cabinet LED Lighting, Linkable, UL Listed, Edge lit Technology, Warm White(2700k), White Finished (48 Inch)
$98.99
vLEDQuant
$98.99
Visit product page →Allows for easy replacement of existing fluorescent, incandescent, halogen and xenon under cabinet lighting. Built-in driver, captive screws and knockouts for easy installation in new work or remodel applications.
FEATURES
• Built-in integral electronic driver
• Dimmable 120V
• On / Off rocker switch
• ≥80 or ≥90 CRI
• Available in 9 different lengths
• Rear panel punch-in electrical connectors for easy wiring
• 50,000 hour life expectancy
• Linkable up to 400W -
LEDQuant
Dimmable Hardwired Under Cabinet LED Lighting, Linkable, UL Listed, Edge lit Technology, Warm White(2700k), White Finished 8" to 48"
37.99 $32.29
vLEDQuant
$37.99 $32.29
Visit product page →Allows for easy replacement of existing fluorescent, incandescent, halogen and xenon under cabinet lighting. Built-in driver, captive screws and knockouts for easy installation in new work or remodel applications.
FEATURES
• Built-in integral electronic driver
• Dimmable 120V
• On / Off rocker switch
• ≥80 or ≥90 CRI
• Available in 9 different lengths
• Rear panel punch-in electrical connectors for easy wiring
• 50,000 hour life expectancy
• Linkable up to 400W -
LEDQuant
Dimmable MR16 6W CREE High power LED Spot Light Bulb, Warm White, Energy Efficient
12.49 $9.99
vLEDQuant
Dimmable MR16 6W CREE High power LED Spot Light Bulb, Warm White, Energy Efficient
$12.49 $9.99
Visit product page →Dimmable, Warm White, Energy Efficient LED spot bulb with reduced energy consumption by up to 80%. Great replacement for a 50W MR16 halogen bulb. It's good choice for track lighting, accent lighting and recessed lighting. 2 year guarantee.
SKU Number MR16-6W-WWD Power Consumption 5W Halogen Equivalent 50W Luminous Flux (lm) 320 Lm LED Brand Cree Dimmable Yes CRI Over 75 Beam Angle 45 Degree Color Warm White (2800-3200K) Input Voltage 12V Base Type GU5.3 Certifications CE, RoHS Diameter 1.97in (50mm) Length 2.00in (51mm)
Lifespan Over 50,000 hours
-
Visit product page →ILLUMINATION• Ultra bright, energy efficient, long life Red or Green LED.ELECTRICAL• Dual 120/277 voltage.• Charge rate/power “ON” LED indicator light and push to test switch for mandated code compliance testing.• 4.8V Long-life, maintenance-free, rechargeable NiCd battery.• Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.• Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.WARRANTY / LISTING• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.• UL listed for damp locations. (0°C - 50°C).• Five year warranty of all electronics and housing. Battery pro-rated for five years.OPTIONS• 2C: Dual circuit option on the AC-only unit enables it to be connected to two different (one acting as a back-up to the other) supplies at the same time.• SDT: Self-diagnostic feature performs monthly, biannual, and annual tests to ensure reliable operation and meet electrical and life safety codes.• Custom: Signs available with requested ‘special’ wording.• USA: Substantial transformation assembly in the U.S. complies with “Assembled in the USA” under the Buy American Act.• cUL: Units tested to meet requirements of CAN/CSA-c22.2 No. 141-02 standard for unit equipment.HOUSING• Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant, thermoplastic in white or black finish.• EZ snap-out chevron directional indicators.• Compact, low-profile design.MOUNTING• EZ-snap mounting canopy included for top or end mount.• Universal K/O pattern on back plate for wall mount. -
Visit product page →ILLUMINATION• Ultra bright, energy efficient, long life Red or Green LED.ELECTRICAL• Dual 120/277 voltage.• Charge rate/power “ON” LED indicator light and push to test switch for mandated code compliance testing.• 4.8V Long-life, maintenance-free, rechargeable NiCd battery.• Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90-minute emergency illumination.• Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.WARRANTY / LISTING• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.• UL listed for damp locations. (0°C - 50°C).• Five year warranty of all electronics and housing. Battery pro-rated for five years.OPTIONS• 2C: Dual circuit option on the AC-only unit enables it to be connected to two different (one acting as a back-up to the other) supplies at the same time.• SDT: Self-diagnostic feature performs monthly, biannual, and annual tests to ensure reliable operation and meet electrical and life safety codes.• Custom: Signs available with requested ‘special’ wording.• USA: Substantial transformation assembly in the U.S. complies with “Assembled in the USA” under the Buy American Act.• cUL: Units tested to meet requirements of CAN/CSA-c22.2 No. 141-02 standard for unit equipment.HOUSING• Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant, thermoplastic in white or black finish.• EZ snap-out chevron directional indicators.• Compact, low-profile design.MOUNTING• EZ-snap mounting canopy included for top or end mount.• Universal K/O pattern on back plate for wall mount. -
LEDQuant
EASYPRO Dimmable Pluggable or Hardwired Under Cabinet LED Light, Linkable, Changeable CCT 3000K, 4000K or 6000K, ETL, 8" or 16"
$34.99
vLEDQuant
$34.99
Visit product page →EASYPRO is a high quality series of dimmable under cabinet lights for kitchens, retail displays, offices, coves. With its advanced design it offers the latest and greatest in energy-efficient undercabinet technology. Easy installation: can be just plugged in a receptacle or hardwired. Dimmable, Linkable, and Adjustable CCT features (3000K, 4000K or 6000K) make them increasingly popular linear fixtures on the market to replace existing fluorescent, incandescent, halogen and xenon undercabinet lights.
FEATURES
▪ Built-in integral electronic driver
• Dimmable 120V
• Adjustable CCT: 3000K, 4000K or 6000K
• ≥80 CRI
• Available in 2 lengths: 8" (20mm) and 16" (40mm)
• Finish options: White or Black
• Certifications: CE, RoHS, ETL
• Warranty: 5 years
• Linkable with a connector cord (included)
• Cord with a US plug provided -
Visit product page →ELCO Lighting's inserts are engineered with energy-efficient LED technology that produces even illumination with an incredible 93+ CRI. Designed to be used for New Construction, Remodel, and Retrofit applications, these inserts are rated for a life of 50,000 hours, and meet the Title 24 and Energy Star requirements. Suitable for IC and Non-IC housings manufactured by ELCO or others. The best green choice for simple residential lighting projects.
Features
Fits ELCO 3′′ Dedicated LED Recessed Housings for New Construction and Remodel.
Soft white lens provides smooth lumen distribution and eliminates LED pixelation. Deep set LED trim reduces glare while providing area illumination.
Diecast construction provides lasting durability.
CA Title 24, ENERGY STAR, JA8-2016-E.
Life Span of 50,000 hours L70.
Specifications Wattage 9W
Lumens 675 lm - 700 lm
Voltage 120V
Color Temp. 3000K
Dimmable Triac/ELV Lamp Type LED
Beam Angle 90° CRI 93+
Wet Location Listed
-
Visit product page →Item：WSD-LHB-TBAR-G2
Download：
DATA /SPEC SHEETPackage:
Packing size: 14x3x1 inch
Weight： 0.4 LBS 1 PCS） -
Visit product page →Flange Mounting Kit for 1x4 LED Flat Panel
-
Visit product page →The Ariel Shade barn light comes in a variety of colors, finishes, and mounting options. Mounting options include cords, stems, flush mounts, and goosenecks. UL listed for wet locations, this shade can be placed indoors or out. It can be lamped with your choice of lighting ranging from HIDs to LEDs.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (Bulb Not Included) Clear glass cover included.
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 10" Deep Bowl Shade (Available in multiple color finishes)
167.99 $132.99
vHi-Lite Manufacturing
Hi-Lite 10" Deep Bowl Shade (Available in multiple color finishes)
$167.99 $132.99
Visit product page →Our Deep Bowl Shade Collection features industrial quality barn lights with a modern sleek look. The Deep Bowl Shade comes in a variety of styles and sizes. Fixture and mount colors can be modified per specifications. Mounting options include: cords, stems, flush mounts, and a variety of arm styles. Barn lights can be accessorized to your liking with cast guards, wire guards, globes, and glass. Flexible tubing is available for cord mounted fixtures only.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
vHi-Lite Manufacturing
Hi-Lite 10" Elara Shade (Available in multiple color finishes)
$380.40 $305.90
Visit product page →Our Elara Shade is perfect for gooseneck lighting, but it can be mounted using a selection of mounting options, including stem, cord, and flush mount. It can be color coated in any one of our upgraded or standard finishes. Wattage lamp options also vary depending on what your preferences are. Fluorescent and LED options are available.
Clear Glass and Cast Guard Included.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8 in.-10 in.) 200W Standard Incandescent (12 in.-16 in.) (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Visit product page →The Oberon Shade can be used with various mounts. Whether you want to hang it on a stem, cord, or flush mount, we offer a variety of mounting specifications to help you fulfill your specific lighting necessities.
With 3 shade sizes to choose from, and an assortment of finish choices, your Oberon shade can be customized entirely. A variety of lamping and wattage options is also available, along with optional accessories.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8" and 10"), 200W Standard Incandescent (12") (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Oberon Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-24208.pdf
Spec-Sheet-H-24210.pdf
Spec-Sheet-H-24212.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Oberon Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-24208.pdf
Spec-Sheet-H-24210.pdf
Spec-Sheet-H-24212.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
vHi-Lite Manufacturing
Hi-Lite 12" Angle Shade (Available in multiple color finishes)
$201.60 $159.60
Visit product page →The Angle Shade Gooseneck Lighting Collection features slanted lights that are often used for restaurant and sign lighting, as they are great for highlighting signs and artwork. These fixtures are available in a number of sizes, and they also suit a variety of mounts. Mounting options include: stems, flush mounts, and a selection of arm styles. Opt for a mixing and matching of colors to give them a more unconventional appearance, or give them a low-key appearance with standard tones like Black or Galvanized steel. Accessorize your Angle Shades with cast guards, wire guards, globes, and glass. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
Download spec sheet to see other options for this fixture
Spec-Sheet-H-EMC-7-7-inch.pdf
Spec-Sheet-H-EMC-10-10-inch.pdf
Spec-Sheet-H-EMC-12-12-inch.pdf
Spec-Sheet-H-EMC-14-14-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Wire Guard Options.pdfFixture body is Made in the USA.
-
Visit product page →The Ariel Shade barn light comes in a variety of colors, finishes, and mounting options. Mounting options include cords, stems, flush mounts, and goosenecks. UL listed for wet locations, this shade can be placed indoors or out. It can be lamped with your choice of lighting ranging from HIDs to LEDs.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (Bulb Not Included) Clear glass cover included.
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 12" Deep Bowl Shade (Available in multiple color finishes)
192.00 $152.00
vHi-Lite Manufacturing
Hi-Lite 12" Deep Bowl Shade (Available in multiple color finishes)
$192.00 $152.00
Visit product page →Our Deep Bowl Shade Collection features industrial quality barn lights with a modern sleek look. The Deep Bowl Shade comes in a variety of styles and sizes. Fixture and mount colors can be modified per specifications. Mounting options include: cords, stems, flush mounts, and a variety of arm styles. Barn lights can be accessorized to your liking with cast guards, wire guards, globes, and glass. Flexible tubing is available for cord mounted fixtures only.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
vHi-Lite Manufacturing
Hi-Lite 12" Elara Shade (Available in multiple color finishes)
$401.40 $338.20
Visit product page →Our Elara Shade is perfect for gooseneck lighting, but it can be mounted using a selection of mounting options, including stem, cord, and flush mount. It can be color coated in any one of our upgraded or standard finishes. Wattage lamp options also vary depending on what your preferences are. Fluorescent and LED options are available.
Clear Glass and Cast Guard Included.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8 in.-10 in.) 200W Standard Incandescent (12 in.-16 in.) (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Visit product page →The Oberon Shade can be used with various mounts. Whether you want to hang it on a stem, cord, or flush mount, we offer a variety of mounting specifications to help you fulfill your specific lighting necessities.
With 3 shade sizes to choose from, and an assortment of finish choices, your Oberon shade can be customized entirely. A variety of lamping and wattage options is also available, along with optional accessories.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8" and 10"), 200W Standard Incandescent (12") (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Oberon Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-24208.pdf
Spec-Sheet-H-24210.pdf
Spec-Sheet-H-24212.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Oberon Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-24208.pdf
Spec-Sheet-H-24210.pdf
Spec-Sheet-H-24212.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 12" Shallow Dome Warehouse Shade (Available in multiple color finishes)
141.60 $112.10
vHi-Lite Manufacturing
Hi-Lite 12" Shallow Dome Warehouse Shade (Available in multiple color finishes)
$141.60 $112.10
Visit product page →Antique barn lights served as the inspiration behind our Shallow Dome Warehouse Shade. Fixture and mount colors can be customized accordingly. Mounting options include cords, stems, flush mounts, and goosenecks. Flexible tubing is available for cord-mounted fixtures only. Choose from a variety of accessories including cast guards, wire guards, and glass. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 12" Titan Bell Shade (Available in multiple color finishes)
230.40 $182.40
vHi-Lite Manufacturing
Hi-Lite 12" Titan Bell Shade (Available in multiple color finishes)
$230.40 $182.40
Visit product page →Our Titan Bell Shade features a bell-like profile. Whether you mount this on a gooseneck, cord, stem, or flush mount, this barn light is customizable to suit your commercial or residential lighting needs. Choose your preferred finish along with optional accessories, and also decide on your wattage and lamping needs.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Visit product page →The Ariel Shade barn light comes in a variety of colors, finishes, and mounting options. Mounting options include cords, stems, flush mounts, and goosenecks. UL listed for wet locations, this shade can be placed indoors or out. It can be lamped with your choice of lighting ranging from HIDs to LEDs.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (Bulb Not Included) Clear glass cover included.
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
vHi-Lite Manufacturing
Hi-Lite 14" Elara Shade (Available in multiple color finishes)
$421.40 $368.60
Visit product page →Our Elara Shade is perfect for gooseneck lighting, but it can be mounted using a selection of mounting options, including stem, cord, and flush mount. It can be color coated in any one of our upgraded or standard finishes. Wattage lamp options also vary depending on what your preferences are. Fluorescent and LED options are available.
Clear Glass and Cast Guard Included.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8 in.-10 in.) 200W Standard Incandescent (12 in.-16 in.) (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 14" Shallow Dome Warehouse Shade (Available in multiple color finishes)
146.40 $115.90
vHi-Lite Manufacturing
Hi-Lite 14" Shallow Dome Warehouse Shade (Available in multiple color finishes)
$146.40 $115.90
Visit product page →Antique barn lights served as the inspiration behind our Shallow Dome Warehouse Shade. Fixture and mount colors can be customized accordingly. Mounting options include cords, stems, flush mounts, and goosenecks. Flexible tubing is available for cord-mounted fixtures only. Choose from a variety of accessories including cast guards, wire guards, and glass. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 14" Titan Bell Shade (Available in multiple color finishes)
312.00 $247.00
vHi-Lite Manufacturing
Hi-Lite 14" Titan Bell Shade (Available in multiple color finishes)
$312.00 $247.00
Visit product page →Our Titan Bell Shade features a bell-like profile. Whether you mount this on a gooseneck, cord, stem, or flush mount, this barn light is customizable to suit your commercial or residential lighting needs. Choose your preferred finish along with optional accessories, and also decide on your wattage and lamping needs.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 15" Pacific Shade (Available in multiple color finishes)
288.00 $228.00
vHi-Lite Manufacturing
Hi-Lite 15" Pacific Shade (Available in multiple color finishes)
$288.00 $228.00
Visit product page →The Pacific Shade's sleek design lends itself to both residential and commercial purposes. Not restricted to only gooseneck arms, this shade also makes a great pendant or flush mount. Available in 2 sizes, the Pacific Shade can be customized per specifications. This barn light can be accessorized with cast guards, wire guards, glass, and acorn globes. Flexible tubing is available for cord mounted fixtures. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Pacific Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-EH-13115-15-inch.pdf
Spec-Sheet-EH-13120-20-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Pacific Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-EH-13115-15-inch.pdf
Spec-Sheet-EH-13120-20-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Visit product page →The Ariel Shade barn light comes in a variety of colors, finishes, and mounting options. Mounting options include cords, stems, flush mounts, and goosenecks. UL listed for wet locations, this shade can be placed indoors or out. It can be lamped with your choice of lighting ranging from HIDs to LEDs.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (Bulb Not Included) Clear glass cover included.
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Ariel Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-1208-8-inch.pdf
Spec-Sheet-H-1210-10-inch.pdf
Spec-Sheet-H-1212-12-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 16" Deep Bowl Shade (Available in multiple color finishes)
223.20 $176.70
vHi-Lite Manufacturing
Hi-Lite 16" Deep Bowl Shade (Available in multiple color finishes)
$223.20 $176.70
Visit product page →Our Deep Bowl Shade Collection features industrial quality barn lights with a modern sleek look. The Deep Bowl Shade comes in a variety of styles and sizes. Fixture and mount colors can be modified per specifications. Mounting options include: cords, stems, flush mounts, and a variety of arm styles. Barn lights can be accessorized to your liking with cast guards, wire guards, globes, and glass. Flexible tubing is available for cord mounted fixtures only.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Deep Bowl Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-16110-10-inch.pdf
Spec-Sheet-H-16112-12-inch.pdf
Spec-Sheet-H-16116-16-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
vHi-Lite Manufacturing
Hi-Lite 16" Elara Shade (Available in multiple color finishes)
$514.20 $400.90
Visit product page →Our Elara Shade is perfect for gooseneck lighting, but it can be mounted using a selection of mounting options, including stem, cord, and flush mount. It can be color coated in any one of our upgraded or standard finishes. Wattage lamp options also vary depending on what your preferences are. Fluorescent and LED options are available.
Clear Glass and Cast Guard Included.
Additional Information
Max Wattage Per Socket: 100W Standard Incandescent (8 in.-10 in.) 200W Standard Incandescent (12 in.-16 in.) (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
HiLite Elara Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-60108-8-inch.pdf
Spec-Sheet-H-60110-10-inch.pdf
Spec-Sheet-H-60112-12-inch.pdfSpec-Sheet-H-60114-14-inch.pdf
Spec-Sheet-H-60116-16-inch.pdf
HiLite Color Spec
HiLite-Color-Chart.pdfGlass Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 16" Emblem Angle Shade (Available in multiple color finishes)
295.20 $233.70
vHi-Lite Manufacturing
Hi-Lite 16" Emblem Angle Shade (Available in multiple color finishes)
$295.20 $233.70
Visit product page →Our Emblem Angle Shades are functional lights designed at an angle, making them perfect for illuminating business storefronts and signs. However, these commercial sign lights can also be used for residential purposes; illuminate artwork, or highlight entryways with these angled lights. They can mount to a variety of arm and gooseneck styles. Shades come in 4 sizes. Fixture and mount colors can be modified per specifications and accessorized with cast guards, wire guards, glass, and globes. Fluorescent and LED options are also available.
Additional InformationMax Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
Glass options not available for 8" shade. Large cast/wire guard and glass options not available for 10" shade.
Download spec sheet to see other options for this fixture
Spec-Sheet-H-EM-08-8-inch.pdf
Spec-Sheet-H-EM-10-10-inch.pdf
Spec-Sheet-H-EM-12-12-inch.pdf
Spec-Sheet-H-EM-16-16-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 16" Titan Bell Shade (Available in multiple color finishes)
350.40 $277.40
vHi-Lite Manufacturing
Hi-Lite 16" Titan Bell Shade (Available in multiple color finishes)
$350.40 $277.40
Visit product page →Our Titan Bell Shade features a bell-like profile. Whether you mount this on a gooseneck, cord, stem, or flush mount, this barn light is customizable to suit your commercial or residential lighting needs. Choose your preferred finish along with optional accessories, and also decide on your wattage and lamping needs.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 16" Umbrella Shade (Available in multiple color finishes)
312.00 $247.00
vHi-Lite Manufacturing
Hi-Lite 16" Umbrella Shade (Available in multiple color finishes)
$312.00 $247.00
Visit product page →The Umbrella Angle Shade is suited for all barn light styles, including wall mounts, cord mounts and post tops. Fixture and mount colors can be customized per specifications. Optional accessories available. Mounting options include: cord, stem, flush mount, post top, and arm options, including multiple gooseneck arm styles.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 18" Shallow Dome Warehouse Shade (Available in multiple color finishes)
175.20 $138.70
vHi-Lite Manufacturing
Hi-Lite 18" Shallow Dome Warehouse Shade (Available in multiple color finishes)
$175.20 $138.70
Visit product page →Antique barn lights served as the inspiration behind our Shallow Dome Warehouse Shade. Fixture and mount colors can be customized accordingly. Mounting options include cords, stems, flush mounts, and goosenecks. Flexible tubing is available for cord-mounted fixtures only. Choose from a variety of accessories including cast guards, wire guards, and glass. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Shallow Dome Warehouse Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-15512-12-inch.pdf
Spec-Sheet-H-15514-14-inch.pdf
Spec-Sheet-H-15516-16-inch.pdf
Spec-Sheet-H-15518-18-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 18" Titan Bell Shade (Available in multiple color finishes)
386.40 $305.90
vHi-Lite Manufacturing
Hi-Lite 18" Titan Bell Shade (Available in multiple color finishes)
$386.40 $305.90
Visit product page →Our Titan Bell Shade features a bell-like profile. Whether you mount this on a gooseneck, cord, stem, or flush mount, this barn light is customizable to suit your commercial or residential lighting needs. Choose your preferred finish along with optional accessories, and also decide on your wattage and lamping needs.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Titan Bell Shade Order Guide.pdf
HiLite Color Spec
Glass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 18" Umbrella Shade (Available in multiple color finishes)
350.40 $277.40
vHi-Lite Manufacturing
Hi-Lite 18" Umbrella Shade (Available in multiple color finishes)
$350.40 $277.40
Visit product page →The Umbrella Angle Shade is suited for all barn light styles, including wall mounts, cord mounts and post tops. Fixture and mount colors can be customized per specifications. Optional accessories available. Mounting options include: cord, stem, flush mount, post top, and arm options, including multiple gooseneck arm styles.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 20" Pacific Shade (Available in multiple color finishes)
324.00 $266.00
vHi-Lite Manufacturing
Hi-Lite 20" Pacific Shade (Available in multiple color finishes)
$324.00 $266.00
Visit product page →The Pacific Shade's sleek design lends itself to both residential and commercial purposes. Not restricted to only gooseneck arms, this shade also makes a great pendant or flush mount. Available in 2 sizes, the Pacific Shade can be customized per specifications. This barn light can be accessorized with cast guards, wire guards, glass, and acorn globes. Flexible tubing is available for cord mounted fixtures. Fluorescent and LED options are also available.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of goose neck arm, cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Pacific Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-EH-13115-15-inch.pdf
Spec-Sheet-EH-13120-20-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Pacific Shade Collection Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-EH-13115-15-inch.pdf
Spec-Sheet-EH-13120-20-inch.pdfHiLite Color Spec
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 20" Umbrella Shade (Available in multiple color finishes)
386.40 $305.90
vHi-Lite Manufacturing
Hi-Lite 20" Umbrella Shade (Available in multiple color finishes)
$386.40 $305.90
Visit product page →The Umbrella Angle Shade is suited for all barn light styles, including wall mounts, cord mounts and post tops. Fixture and mount colors can be customized per specifications. Optional accessories available. Mounting options include: cord, stem, flush mount, post top, and arm options, including multiple gooseneck arm styles.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 22" Umbrella Shade (Available in multiple color finishes)
427.20 $338.20
vHi-Lite Manufacturing
Hi-Lite 22" Umbrella Shade (Available in multiple color finishes)
$427.20 $338.20
Visit product page →The Umbrella Angle Shade is suited for all barn light styles, including wall mounts, cord mounts and post tops. Fixture and mount colors can be customized per specifications. Optional accessories available. Mounting options include: cord, stem, flush mount, post top, and arm options, including multiple gooseneck arm styles.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
-
Hi-Lite Manufacturing
Hi-Lite 24" Umbrella Shade (Available in multiple color finishes)
465.60 $368.60
vHi-Lite Manufacturing
Hi-Lite 24" Umbrella Shade (Available in multiple color finishes)
$465.60 $368.60
Visit product page →The Umbrella Angle Shade is suited for all barn light styles, including wall mounts, cord mounts and post tops. Fixture and mount colors can be customized per specifications. Optional accessories available. Mounting options include: cord, stem, flush mount, post top, and arm options, including multiple gooseneck arm styles.
Additional Information
Max Wattage Per Socket: 200W Standard Incandescent (Bulb Not Included)
Number Of Sockets: 1
UL Listed: Rated For Wet Locations
Available in other lamping options SEE SPEC SHEET AND CALL FOR PRICING.NOTE: Choice of cast guard and wire guard will be assumed to be the same color as the shade. Please call to mix and match colors.
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
HiLite Umbrella Shade Order Guide.pdf
Download spec sheet to see other options for this fixture
Spec-Sheet-H-94716-16-inch.pdf
Spec-Sheet-H-94718-18-inch.pdf
Spec-Sheet-H-94720-20-inch.pdf
Spec-Sheet-H-94722-22-inch.pdf
Spec-Sheet-H-94724-24-inch.pdf
Spec-Sheet-H-94727-27-inch.pdfHiLite Color Chart
HiLite-Color-Chart.pdfGlass and Guard Options
Cast/Wire Guard and Glass Options.pdf
Fixture body is Made in the USA.
